Qinglong Waterproofing Malaysia
Industry News
Current location: Home > News > Industry News
.

Waterproofing Manufacturer in Malaysia for Roofs, Balconies and Below-Ground Structures

Published: 2026-11-17 11:58Views:

建筑变新 (4) (1).jpg

QingLong Waterproofing manufactures and supplies waterproofing products for contractors, renovation teams and building projects in Malaysia. Its range includes coatings for exposed roofs and membranes for concrete structures. If you are comparing waterproofing manufacturers in Malaysia, start with the application. The surface, exposure and construction sequence determine which products are suitable and what your crew needs to prepare before installation.


What to Check When Sourcing Waterproofing Materials

Ask for the technical data sheet for the specific product you intend to order. Check the accepted substrates, primer requirements, coverage rate and application conditions. These details affect how much material you need and how you schedule the work. For example, a coating that requires several coats and a drying interval may need more than one site visit. A membrane estimate should account for overlaps and upturns as well as the main surface.


Share drawings or photos when the project has details that could affect product selection. These could include penetrations through a basement wall, a balcony door threshold or roof equipment that limits access. Confirm which materials the specified system uses at those details before placing the order, so your crew can price and plan the entire installation.


Exposed Roofs and Roof Refurbishment

On a concrete roof, inspect cracks, drain outlets and areas where water tends to collect. If an old coating is present, check whether it is still firmly bonded and compatible with the proposed system. On a metal roof, pay particular attention to corroded sheet overlaps, loose fasteners and flashings. For tiled roofs, identify cracked or displaced tiles and check the areas around ridges and valleys before deciding on the repair scope.


QL Exposed Waterproof Fiber-Pro is a ready-to-use, fibre-reinforced waterproofing coating for suitable concrete, metal and tiled roofs. The fibres help improve crack resistance, and the flexible coating accommodates movement as the roof heats and cools. On suitable substrates, crews can apply it without a separate primer once the surface has been properly prepared. Stir the product before application and use the specified coverage rate to estimate material quantities.


For refurbishment work, include local repairs in your quotation. Replacing a damaged roof component or addressing recurring ponding can change the scope and timing of the coating work.


Balconies and Concrete Slabs

For a balcony, establish whether the waterproofing will be left exposed or covered with tiles or screed. That decision affects which systems are suitable and how the waterproofing connects to the surrounding finishes. Inspect the floor falls, drain outlets and door threshold early. A low threshold, for example, can limit the space available for a waterproofing upturn once the finished floor level is set.


The contractor and tiling team should agree on when waterproofing can be covered and how it will be protected during subsequent work. If the project calls for a water test, schedule it before the finishes go on, when the waterproofing is still accessible for inspection and any necessary repairs.


Below-Ground Concrete and Basement Waterproofing

For below-ground structures, check when the crew can reach the face that needs waterproofing. A pre-applied membrane is installed before the structural concrete is cast against it. This sequence can suit a basement wall where access from the outside will be limited after casting. A post-applied membrane is installed on a prepared concrete surface after casting and requires enough access for installation and detailing.


Review construction joints, pipe penetrations and transitions between slabs and walls alongside the membrane specification. These interfaces often involve several trades. Confirm who will prepare each detail and when it can be inspected before the next stage covers it, whether that stage is concrete placement, protection work or backfilling.


Conclusion

Start with the site conditions when choosing waterproofing materials. For a roof, check the substrate and existing damage before selecting a coating. For a balcony, confirm how the waterproofing will connect to drains, thresholds and finishes. For a basement, use the construction sequence and site access to determine when the membrane can be installed. With those details, your supplier can help confirm product suitability and quote quantities that reflect the work on site.


Sourcing waterproofing materials for your next project? Share your site photos, drawings or measurements with QingLong to discuss product selection and contractor pricing. WhatsApp 019-776 6971


Frequently Asked Questions (FAQs)

1. Can I use the same waterproofing coating on concrete and metal roofs?

Yes, if the coating is specified for both surfaces. Preparation will differ. Concrete may need crack repairs and removal of loose coating, while metal roofing may need corrosion treatment and repairs around laps, fasteners and flashings.


2. Do I need a primer before applying roof waterproofing?

It depends on the product and substrate. QL Exposed Waterproof Fiber-Pro can be applied without a separate primer on suitable, properly prepared surfaces. Check compatibility before coating over an existing finish.


3. What is the difference between pre-applied and post-applied waterproofing membranes?

A pre-applied membrane goes in before concrete is cast against it. A post-applied membrane goes onto prepared concrete after casting. The construction sequence and site access help determine which approach suits the project.


4. How much waterproofing material should I order?

Use the measured application area and the product’s specified coverage rate. For coatings, confirm whether coverage is stated per coat or for the complete system. For membranes, include overlaps, upturns and detailing around penetrations.


5. What should I provide when requesting a waterproofing quotation?

Share the project location, application area, substrate, estimated square footage and current surface condition. Include photos for refurbishment work or drawings for new construction. For balconies and slabs, state whether the waterproofing will remain exposed or be covered.

Recommendation