OT801- Exterior Wall Transparent Waterproof Coating - Polyurethane waterproof - Qinglong Waterproofing

+60 7509 0986

qinglongmsia@gmail.com

English

OT801- Exterior Wall Transparent Waterproof Coating

OT801 is a special polymer emulsion as base, adding synthetic rubber latex modified agent, surface active agent, plasticizer and other refined polymer flexible transparent colourless exterior wall waterproof coating

Features
Product Features:
1. The colorless, transparent and coated will not destroy the decorative effect of the original wall, but will not appear yellow, dust and other phenomena.
2. Heat resistance, UV resistance, ozone resistance, acid and alkali resistance, wide range of temperature adjustment.
3. The film has a better film, soft and tenacity.
4. It is a kind of environmental protection product with water as a dispersing medium, which is not combustible, non-toxic, tasteless and pollution-free.
5. Cold construction, safe operation, easy construction, direct spraying, painting, brush, scraping on the wall.
6. The membrane has microporous permeability, which can be applied to the heat evaporation of humid climate in the south.
7.They are cheap and cheap.

Applications:
1. Waterproofing and patching of external walls of various buildings.
2. Applied to the waterproof treatment of various finishing materials.
3. All kinds of interior decoration material surface waterproof, moisture-proof.

Construction:
1. The base surface cleans, with cleanser, wire brush, dishcloth, as far as possible clean the
walls of the wall, but do not destroy the original surface gloss.
2. Use the brush to apply the transparent waterproof glue to the wall, the veneer brick joint, the brush should be very careful.
3. The brush should be brushed for 2~3 times, the coating should be done once again after coating, and the brush direction should be crisscrossed.
4. In the construction process, such as the viscosity is too large, can be diluted with water, but the amount of water should be as little as possible.

Package, storage and transportation:
1. Material should be sealed storage in 5°C~30 °C in a cool ventilated place, shelf life of 12 months.
2. The product is packed in plastic bucket: 1kg/barrel, 4kg/barrel, 10kg/barrel, 20kg/pail.

Cautions:
1. Under 5°C or damp not use ventilated environment, otherwise it will affect the film-forming effect.
2. Before construction, the base surface must be dry and without water, which cannot be putty, greasy or uneven.
3. If it is raining, please stop the construction and protect the construction area.
4. It is not suitable for long-term immersion.

Technical Index:
Standard: Q/ZSQL 01-2014
The experimental project Technical indicators
Appearance Clear, sticky liquid
Solid content 50+2%
Heat resistance 80+2°C, 5 hours, no change
Low temperature flexible -20°C, qualify
Elongation ≥ 400%
Fracture tensile strength 0.4 ~ 0.8 MPa
The permeability resistance 0.3MPa, 30min waterproofing
Bonding strength ≥ 1.0MPa
Table dry time 1 hour

Projects
  • Baoshan City Museum, Yunnan
    Baoshan City Museum, Yunnan

    The Baoshan Museum broke ground on February...

  • Jiruixiang Town, Xilinhot, Inner Mongolia
    Jiruixiang Town, Xilinhot, Inner Mongolia

    Jiruixiang Town is developed by Shenyuan Rea...

  • Guangzhou Metro
    Guangzhou Metro

    The Guangzhou Metro is an urban rail transi...

A free consultation

Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.

Copyright © QINGLONG BUILDING SUPPLIES SDN BHD All Rights Reserved.