QL- Ceramic Tile Sealer - QL Common Leak Repair Products - Qinglong Waterproofing

+60 7509 0986

qinglongmsia@gmail.com

English

QL- Ceramic Tile Sealer

This product is packed in a unique Germany-made plastic bottle with static mixing nozzle The dispensing gun forces the dual component adhesives to mix and react thoroughly, enabling the compound to cure and produce a coloured appearance

Features
Product Features:
1. All-in-one, hard as ceramic, waterproof, prevent mould, anti-fouling, resistant to acid, alkali, aging and oil;
2. Modern colours, incorporating times elements, elegant, luxurious, splendid, possessing silky gloss and unique charm;
3. Easy to use, glue gun applicator, firm and effective filler, no shrinkage, one-step formation, simple and efficient, suitable for family DIY, cost-saving;
4. No dripping effect when applied on wall, retaining the creative and aesthetic design of the product;
5. Excellent hardness, shrinkage rate is consistent with that of the tiles, no cracking, single component adhesive has poor hardness, thus it will shrink, sunk and crack. However, this product can solve these problems once and for all, resulting in longer product life.

Application Range:
1. Gap-filling, waterproofing, mould-proofing, beautifying of seams of various tiles, stones, glass bricks, quartz bricks, ceramic tiles, mosaics and etc.;
2. Gap-filling of kitchen counters, shower rooms, toilets, window sills, countertops and etc., beautifying of seams of floors, aluminium-plastic panels, background walls and etc.

Application Methods:
Firstly, install the nozzle, then connect it with the high-quality and labour-saving dispensing gun.
Dispense the adhesive in upward direction so that the dual-component adhesives can be fully mixed in
the middle part of the nozzle. Only apply the adhesive after it is released from the nozzle.
1. Clean the groove and make sure that there is free of water or powder. This can prevent flaking after application;
2. Attach a textured paper or tape to the edges of the groove before applying the adhesive;
3. Use the dispensing gun for application. Release about 40cm of adhesive and discard it to ensure that the dual-component adhesives are evenly mixed;
4. Gluing along the gap, the diameter of the outlet of the glue should be smaller than the width of the gap as it is better not to spill the adhesive;
5. After finishing applying, use a round stick to smoothen and straighten the adhesive strip. Tear the textured paper or tape before the adhesive cures. If the adhesive overflows, wipe it with alcohol or wait for it to cure and remove it with a knife scraper;
6. After leaving it for 3 to 5 hours, it will achieve initial curing and cure completely the next day, becoming as bright as porcelain.


Packaging and transportation:
Specification: 400ml

Notice:
1. If the adhesive is not released continuously for more than 20 minutes during the application, the adhesive in the mixing tube may have been cured. If it is difficult to release any adhesive or no glue can be dispensed, it is necessary to replace the mixing tube with a new one;
2. For unused adhesive in the tube, first unscrew the mixing tube, wipe off excessive adhesive on the top of the tube, then screw the plastic cap back on and store it. Replace the mixing tube with a new one for next usage;
3. The company's products are guaranteed to have good quality, but the user must decide the applicability of the product. The company will not be liable for any damage caused by improper application or any other external factors.

Projects
  • Baoshan City Museum, Yunnan
    Baoshan City Museum, Yunnan

    The Baoshan Museum broke ground on February...

  • Coral Palace Holiday Inn, Country Garden, Hainan
    Coral Palace Holiday Inn, Country Garden, Hainan

    The Coral Palace Holiday Inn is a tourism-o...

  • Guangjin International Business Center, Foshan
    Guangjin International Business Center, Foshan

    Guangjin International Business Center is a ...

A free consultation

Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.

  • If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Copyright © QINGLONG BUILDING SUPPLIES SDN BHD All Rights Reserved.