Privacy Policy   |   News Center   |   QL Video   |   Contact Us   |   Quotation consultation   
  • OT801- Exterior Wall Transparent Waterproof Coating

OT801- Exterior Wall Transparent Waterproof Coating

Product specification:
Coating amount:
Storage period:
Construction method:
Scope of application:

Contact Hotline
+60 7509 0986
Product catalog

OT801- Exterior Wall Transparent Waterproof Coating简介

OT801- Exterior Wall Transparent Waterproof Coating Product introduction

Product template

OT801- Exterior Wall Transparent Waterproof Coating Product template



Product Features:
1. The colorless, transparent and coated will not destroy the decorative effect of the original wall, but will not appear yellow, dust and other phenomena.
2. Heat resistance, UV resistance, ozone resistance, acid and alkali resistance, wide range of temperature adjustment.
3. The film has a better film, soft and tenacity.
4. It is a kind of environmental protection product with water as a dispersing medium, which is not combustible, non-toxic, tasteless and pollution-free.
5. Cold construction, safe operation, easy construction, direct spraying, painting, brush, scraping on the wall.
6. The membrane has microporous permeability, which can be applied to the heat evaporation of humid climate in the south.
7.They are cheap and cheap.
Scope of application

OT801- Exterior Wall Transparent Waterproof CoatingScope of application



Applications:
1. Waterproofing and patching of external walls of various buildings.
2. Applied to the waterproof treatment of various finishing materials.
3. All kinds of interior decoration material surface waterproof, moisture-proof.
Construction tools

OT801- Exterior Wall Transparent Waterproof CoatingConstruction requirements



Construction:
1. The base surface cleans, with cleanser, wire brush, dishcloth, as far as possible clean the
walls of the wall, but do not destroy the original surface gloss.
2. Use the brush to apply the transparent waterproof glue to the wall, the veneer brick joint, the brush should be very careful.
3. The brush should be brushed for 2~3 times, the coating should be done once again after coating, and the brush direction should be crisscrossed.
4. In the construction process, such as the viscosity is too large, can be diluted with water, but the amount of water should be as little as possible.

OT801- Exterior Wall Transparent Waterproof CoatingTechnical index

Technical Index:
Standard: Q/ZSQL 01-2014
The experimental project Technical indicators
Appearance Clear, sticky liquid
Solid content 50+2%
Heat resistance 80+2°C, 5 hours, no change
Low temperature flexible -20°C, qualify
Elongation ≥ 400%
Fracture tensile strength 0.4 ~ 0.8 MPa
The permeability resistance 0.3MPa, 30min waterproofing
Bonding strength ≥ 1.0MPa
Table dry time 1 hour
 

OT801- Exterior Wall Transparent Waterproof Coating store up and transport



Package, storage and transportation:
1. Material should be sealed storage in 5°C~30 °C in a cool ventilated place, shelf life of 12 months.
2. The product is packed in plastic bucket: 1kg/barrel, 4kg/barrel, 10kg/barrel, 20kg/pail.

OT801- Exterior Wall Transparent Waterproof Coating Matters needing attention



Cautions:
1. Under 5°C or damp not use ventilated environment, otherwise it will affect the film-forming effect.
2. Before construction, the base surface must be dry and without water, which cannot be putty, greasy or uneven.
3. If it is raining, please stop the construction and protect the construction area.
4. It is not suitable for long-term immersion.

OT801- Exterior Wall Transparent Waterproof CoatingRELATED PRODUCTS