Privacy Policy   |   News Center   |   QL Video   |   Contact Us   |   Quotation consultation   
  • QL- Ceramic Tile Sealer

QL- Ceramic Tile Sealer

Product specification:400ml
Coating amount:
Storage period:
Construction method:
Scope of application:

Contact Hotline
+60 7509 0986
Product catalog

QL- Ceramic Tile Sealer简介

This product is packed in a unique Germany-made plastic bottle with static mixing nozzle The dispensing gun forces the dual component adhesives to mix and react thoroughly, enabling the compound to cure and produce a coloured appearance.


Product Features:
1. All-in-one, hard as ceramic, waterproof, prevent mould, anti-fouling, resistant to acid, alkali, aging and oil;

2. Modern colours, incorporating times elements, elegant, luxurious, splendid, possessing silky gloss and unique charm;

3. Easy to use, glue gun applicator, firm and effective filler, no shrinkage, one-step formation, simple and efficient, suitable for family DIY, cost-saving;

4. No dripping effect when applied on wall, retaining the creative and aesthetic design of the product;

5. Excellent hardness, shrinkage rate is consistent with that of the tiles, no cracking, single component adhesive has poor hardness, thus it will shrink, sunk and crack. However, this product can solve these problems once and for all, resulting in longer product life.


Application Range:
1. Gap-filling, waterproofing, mould-proofing, beautifying of seams of various tiles, stones, glass bricks, quartz bricks, ceramic tiles, mosaics and etc.;
2. Gap-filling of kitchen counters, shower rooms, toilets, window sills, countertops and etc., beautifying of seams of floors, aluminium-plastic panels, background walls and etc.
Construction tools


Application Methods:
Firstly, install the nozzle, then connect it with the high-quality and labour-saving dispensing gun.

Dispense the adhesive in upward direction so that the dual-component adhesives can be fully mixed in
the middle part of the nozzle. Only apply the adhesive after it is released from the nozzle.
1. Clean the groove and make sure that there is free of water or powder. This can prevent flaking after application;

2. Attach a textured paper or tape to the edges of the groove before applying the adhesive;

3. Use the dispensing gun for application. Release about 40cm of adhesive and discard it to ensure that the dual-component adhesives are evenly mixed;

4. Gluing along the gap, the diameter of the outlet of the glue should be smaller than the width of the gap as it is better not to spill the adhesive;

5. After finishing applying, use a round stick to smoothen and straighten the adhesive strip. Tear the textured paper or tape before the adhesive cures. If the adhesive overflows, wipe it with alcohol or wait for it to cure and remove it with a knife scraper;

6. After leaving it for 3 to 5 hours, it will achieve initial curing and cure completely the next day, becoming as bright as porcelain.

QL- Ceramic Tile Sealer Technical Index

QL- Ceramic Tile Sealer Packaging & Transportation




Packaging and transportation:
Specification: 400ml

QL- Ceramic Tile Sealer Notice



Notice:
1. If the adhesive is not released continuously for more than 20 minutes during the application, the adhesive in the mixing tube may have been cured. If it is difficult to release any adhesive or no glue can be dispensed, it is necessary to replace the mixing tube with a new one;

2. For unused adhesive in the tube, first unscrew the mixing tube, wipe off excessive adhesive on the top of the tube, then screw the plastic cap back on and store it. Replace the mixing tube with a new one for next usage;

3. The company's products are guaranteed to have good quality, but the user must decide the applicability of the product. The company will not be liable for any damage caused by improper application or any other external factors.