Privacy Policy   |   News Center   |   QL Video   |   Contact Us   |   Quotation consultation   
  • QL- 2 in 1 Reinforced Waterproof Coating

QL- 2 in 1 Reinforced Waterproof Coating

Product specification:1kg
Coating amount:
Storage period:6 months
Construction method:
Scope of application:

Contact Hotline
+60 7509 0986
Product catalog

QL- 2 in 1 Reinforced Waterproof Coating简介

Introduction:
QL- 2 in 1 Reinforced Waterproof Coating is a high-permeability and reinforced waterproof coating. It is mainly formed by contacting epoxy resin with an accelerator and a curing agent.


Product Features:
1. The liquid material has high permeability. After applying it on concretes or mortars, it will flow along and fill the capillary channels and micro-pores of the base surface, forming a 2~5mm impervious, hydrophobic and uneven reinforcement layer to achieve waterproofing results. Common waterproof coatings peel off easily on concrete surfaces, but this product is a perfect solution to that problem.

2. Strengthening and toughening, applying this product can prevent the concrete surfaces from dusting, and the concrete strength will increase by more than 15%.

3. Excellent performance-price ratio; wet surface application, no need to level this surface, the dry solid content is non-toxic. The waterproof protective seal can last as long as the structure.

4. Wide range of uses. It can be used for grouting of fine cracks in concretes and surface treatment of different materials.


Application Range:
1. Dusting and flaking on concrete mortar, reinforcement and waterproofing. It is especially suitable for waterproofing of surfaces not in contact to water.

2. Reinforcement of weak bonding between different structural layers.

3. Concrete gap repair and grouting reinforcement for roofing, basement, wall and pool.

4. Anti-seepage and reinforcement of joints between PVC pipes.

5. Plugging and reinforcement and waterproofing of various dams, subways, tunnels, etc.
Construction tools


Application Methods:
Brushing Methods
1. Cleaning of the base surface: Remove loose parts, clean the surface of the concrete structure to ensure that it is free of dust, oil and water.

2. Add curing agent to the reinforced waterproof sealant and mix well.

3. Use a roller or brush to evenly paint the product on a clean surface. Generally, it is applied twice. The quantity used for the bottom layer is 0.2kg/ m²~ 0.35kg/ m². After the first layer is solidified for half an hour, apply the second layer. The quantity used is 0.1. Kg/ m² ~ 0.25kg/ m², total quantity used is 0.3kg/ m² ~ 0.6kg/㎡;

4. Protection: The next step can be carried out after 24 hours of painting.


Grouting Methods
1. Cleaning the base surface: Ensure that it is free of dust, water and oil;

2. Fix the grouting nozzle in place and seal the gap with QL- Fast Leakage Fix (quick-setting);

3. Fix the high-pressure hose in place and use a pump for grouting. After the slurry is filled, keep the pressure for a certain period of time, pay close attention to the change of the grouting pressure and prevent the hose from bursting.

4. After the slurry is solidified, remove excessive grout and seal the opening for inserting the nozzle with mortar.



Recommended Tools:
Brush, spatula, float trowel, electronic mixer, mixing bucket.

QL- 2 in 1 Reinforced Waterproof Coating Technical Index



Technical Specifications:
Experimental Project 1 Type
Curing Function
(MPa)
Tensile Strength
≥10
Adhesion Strength
 
Mpa
Dry Adhesion
≥3.0
(ª/Mpa)
Wet Adhesion
≥2.0
 (Mpa)
Impermeability
≥1.0

 
Experimental Project Slurry Function

Low Viscosity Type

Normal Type
Efficacy time (min) >30 >30
Note: The efficacy time refers to the interval time when the mixture of A and B components reaches 200mpa.s of viscosity.

QL- 2 in 1 Reinforced Waterproof Coating Packaging & Transportation


Packaging and Transportation:
1. This product is non-flammable and non-dangerous, thus it can be transported safely;

2. This product can be stored in a dry and cool warehouse, avoid direct exposure to sunlight and in contact with flame. It has a 6-month shelf life;

3. Packing includes: 1kg / set, with exclusive agent, stirrer, brush and gloves.

QL- 2 in 1 Reinforced Waterproof Coating Notice




Notice:
1. The mixed slurry should be used up at one time.

2. Maintain air-circulation at the construction site and wear protective gear.

3. The grouting machine should be cleaned right after using.

4. Stored the product in a cool and ventilated place. Prevent fires and moisture during use and storage.

5. To protect the product from severe impact, strictly avoid placing the bucket upside down.