Privacy Policy   |   News Center   |   QL Video   |   Contact Us   |   Quotation consultation   
  • QL- Exterior Wall Transparent Waterproof Coating

QL- Exterior Wall Transparent Waterproof Coating

Product specification:0.5L, 1L, 5L, 10L
Coating amount:0.1~0.2mm thick (0.1~0.2kg/㎡)
Storage period:12 months
Construction method:
Scope of application:

Contact Hotline
+60 7509 0986
Product catalog

QL- Exterior Wall Transparent Waterproof Coating简介

Introduction:
QL- Exterior Wall Transparent Waterproof Coating is a flexible, transparent and colourless polymer product, which is produced by combining special polymer emulsion, styrene-butadiene rubber polymer modifier, surfactant and plasticizer


Product Features:
1. Colourless and transparent; it will not ruin the original decorative effect after coating; not easy to turn yellow or be stained with dust.

2. Excellent resistance to heat, ultraviolet rays, ozone, acid and alkali; great adaptation to temperature.

3. Excellent film formation, soft and tough.

4. Using water as a dispersion medium; non-toxic, harmless, non-polluting, it is an environmentally-friendly product.

5. Supporting cold application, it is easy to use and can be applied by brushing, rolling, spraying, scraping to the walls.

6. The firm-forming has micro-porous permeability, which is suitable for thermal evaporation in a humid climate in the south; and won’t be agitated.

7. Low dosage and low cost.


Application Range:
1. Suitable for waterproofing repair of exterior wall leakage of various buildings.

2. Suitable for waterproofing applied to the interface of various decorative coating materials.

3. Waterproofing and moisture-proof on the surface of exterior wall decorative materials.
Construction tools


Application Methods:
1. Use detergent, wire brush and cloth to clean the base of the wall as much as possible, but try not to destroy the original surface lustre.

2. Paint the transparent waterproof coating on the wall with a brush. The joints of decorative tiles should be carefully brushed, about 2-3 times in general. When brushing, apply a new coating on top of the other when the previous layer no longing stick to hands, and the direction of brushing should be crisscross-cutting.

3. During the construction process, if the sealant is too high, water can be added, but the amount of water should be as little as possible.

4. Reference consumption: 0.1~0.2mm thick (0.1~0.2kg/㎡)


Recommended Tools:
Brush, spatula, float trowel, electronic mixer, mixing bucket

QL- Exterior Wall Transparent Waterproof Coating Technical Index



Technical Indicators:
Experimental Project Technical Specifications
Exterior Transparent
Solid Content 50+2%
Heat Resistance 80+ 2°C, 5h
Low-temperature Flexibility -20 °C,Pass
Elongation ≥400%
Tensile strength at break 0.4-0.8MPa
 

QL- Exterior Wall Transparent Waterproof Coating Packaging & Transportation


Packaging and Transportation:
1. The materials should be sealed and stored in a cool, ventilated place in temperature between 5°C~30°C, it has a 12-month shelf life;

2. The product is packed in plastic barrels: 0.5L/ barrel, 1L/ barrel, 5L/ barrel, and 10L/ barrel.

QL- Exterior Wall Transparent Waterproof Coating Notice



Notice:
1. Do not work at below 5 ̊C or in a humid and unventilated environment, otherwise, it will affect the firm formation.

2. Before construction, ensure that the base surface is dry and free from dust, oil and bumps.

3. If it rains during construction, please stop the construction and protect the construction area.

4. Not suitable for areas with long-term water immersion.

5. Not suitable for walls with ash, dust and sand.