Privacy Policy   |   News Center   |   QL Video   |   Contact Us   |   Quotation consultation   
  • QL- Roofing Waterproof Coating (weather-resistant and decorative type)

QL- Roofing Waterproof Coating (weather-resistant and decorative type)

Product specification:
Coating amount:
Storage period:
Construction method:
Scope of application:

Contact Hotline
+60 7509 0986
Product catalog

QL- Roofing Waterproof Coating (weather-resistant and decorative type)简介

QL- Roofing Waterproof Coating (weather-resistant and decorative type) Product introduction

QL- Roofing Waterproof Coating (weather-resistant and decorative type) is a single-component water-based waterproof coating It is produced by combining acrylic emulsion with other additives using foreign advanced technologies and materials.

Product template

QL- Roofing Waterproof Coating (weather-resistant and decorative type) Product template



Product Features:
1. Using water as a dispersion medium; non-toxic, ordorless, non-polluting, it is an environmental-friendly product;
2. Single component, cold application, it can be applied by brushing, rolling, spraying, scraping etc.;
3. Excellent resistance to aging, elongation, elasticity, adhesion and firm formation;
4. The waterproof layer is a closed system with overall good waterproof effect, especially suitable for the application of special-shaped structural base layer;
5. Can be used as a colour protective layer for the black waterproof layer of rubberized asphalt to achieve beautifying effect.
Scope of application

QL- Roofing Waterproof Coating (weather-resistant and decorative type)Scope of application



Application Range:
1. Suitable for waterproofing and heat insulation of short-term water-immersed areas such as metal roofing;
2. Especially suitable for roof waterproofing of thin-shell structures. It can also be used as adhesive or exterior wall decorative coating;
3. Suitable for waterproofing and decoration of old roofs.
Construction tools

QL- Roofing Waterproof Coating (weather-resistant and decorative type)Construction requirements



Application Methods:
1. Base surface preparation: The base surface must be flat, firm, clean, no water and osmosis, dents, cracks and leakage must be fixed first, internal and external corners to be made round.
2. Coating:
a. Apply it with a roller or brush;
b. The coating (especially the primer) should be constantly stirred even when in use;
c. The coating should be applied evenly without precipitation;
d. Apply a new coating on top of the other when the previous layer is not sticky to hand;
e. Each layer must be coated according to the specified quality. It should not be too thick or too thin;
f. Use the non-woven fabric to strengthen smaller parts. After applying the first layer, paste the non-woven fabric without using water; thereafter apply the second and third layers.
3. Recommended Amount: 1.5~2.0mm thick (1.5~2.0kg/㎡)


Recommended Tools:
Brush, spatula, float trowel, electronic mixer, mixing bucket

QL- Roofing Waterproof Coating (weather-resistant and decorative type)Technical index

Technical Indicators
Experimental Project Technical Specifications
 (MPa)
Compressive Strength
1.0

Solid Content
≥65
 (%)
Elongation at Break
≥300
 (₵10mm)
Low-temperature Flexibility
≥ -10 °C, No Cracks
 (0.3MPa, 0.5h)
Impervious to Water
Impervious to Water

QL- Roofing Waterproof Coating (weather-resistant and decorative type) store up and transport


Packaging and transportation:
1. The product should be stored in a cool, ventilated indoor environment, with temperature at above 0 ̊C;
2. This product is non-dangerous, non-toxic, odourless, and eco-friendly, it can be transported safely;
3. This product can be stored for 12 months and it still can be used after the storage period should it pass relevant tests;
4. The product packaging is: 1kg/barrel, 5kg/ barrel, 15kg/ barrel.

QL- Roofing Waterproof Coating (weather-resistant and decorative type) Matters needing attention


Notice:
1. Do not work at below 5 ̊C or in a humid and unventilated environment, otherwise, it will affect the firm formation;
2. After application, carefully check all parts of the whole project, especially the fragile parts. If a problem is found, identify the cause and rectify the problem immediately;
3. The coating must be completely dried before it can be immersed in water. Make sure that there is no rain for the following 3 days for outdoor application.

QL- Roofing Waterproof Coating (weather-resistant and decorative type)RELATED PRODUCTS